Revolution Dosing Gun Quick Start Guide
Digital Keypad
Main screen
The top left shows a Wi-Fi icon with bars when it is active. The top right shows the battery state and in the main area the current dose.
Power button
Click once to turn on, press and hold momentarily to turn off. active inactive
Prime button
Push this button and pull the trigger to fill the barrel. Point the Dosing gun up to expel any air in the barrel. This gives manual control of the piston. Click again to exit this mode.
Menu button
Use this button to adjust the delivery and refill speed. Also, use it to turn on sound alert, repeat dose delay, multi-dose (max 10ml dose) and barrel change. The Menu button also functions as the Select button.
Statistics button
Push to see the amount of product administered and the number of doses
Up and Down buttons
Push these buttons to adjust the dose volume.
Batteries
Take note of the polarity of the batteries. Remove the 2 batteries from the bottom of the Dosing Gun and insert them into the charger.
Maintenance
It is imperative that you clean the barrel after every session. Remove the barrel, rinse the barrel with clean, warm water and dry it thoroughly. Remove the inlet and exit valves and clean thoroughly. Lubricate the piston O-ring with petroleum jelly or food/cooking oil.
