Lenta Hoof Handler

Front hoof blocks with a safety winch allow the front leg to be pulled onto a wooden block for safe and easy handling. The Wopa Block is an optional upgrade for on the front - it is a well-known product in NZ.

An overhead winch raises the rear hooves up to an easy trimming height. Multiple height positions can be used depending on the size of the animal.

Easy access through a top access gate to the belly of the animal.

Using the sliding rear gate, a block and tackle can be setup to assist with calving when required. The height and angle can be adjusted accordingly.

The quiet, simple locking system of the C1000 Headbail provides excellent restraint for fitting tags, administering vaccinations and general access to the cow’s head/and neck.

Restrict all movement with the anti-backing bar. Lowering down from the top, the bar applies forward pressure, restricting the animal from being able to back up when operating on it. 

For extra support to the animal, a second belly winch can be added.

Available only on the Vet model crush, the sliding gate is a great way to close off the crush from the race, and is essential when treating a mob of animals, so that the operator is protected. 

A rubber-lined timber floor can be added to the crush, giving a more natural and comfortable surface for lame cattle to stand on. This also gives you the ability to fit load bars and weigh inside the cattle crush as well.

The head scoop is a great accessory to eliminate any movement in the beasts head. This is very useful when inspecting or treating cattle for pink eye. 

CollarBoss Hydraulic Neck Extenders can be fitted to the C3000 Headbail on Te Pari Cattle Crushes to safely and securely position a cow’s neck, giving easy access to fit or adjust virtual fencing collars. No power needed, simple control.