EZE Bloodless Castration Instructions

Place under arm pit

Load clip with notch up and forward

Slide over pull rod. Also pull the pull rod back so it is out of the way for easier installation

Place the clip in the slot so it is completely in and flush

Hold the band with the thumb on top and the index finger on the end of the spreader bar to keep from slipping off

Continue holding while stretching band with other hand

Stretch to other spreader bar and attach. When stretching try to stretch upper portion as tight as possible leaving lower portion with as much slack as possible

Hold band wioth both thumbs on top and both index fingers in the end of spreader bars

Start stretching lower portion of band with remaining fingers

Continue until band is in groove of pull back rod

Ensure band isn’t twisted when attaching to pull back rod

Hold castrator by the side grip handle. Side grip may be removed and placed on other side

With other hand, pull the rod back until the band slips through the hole where you placed the clip

Make sure the castrator is facing upright since the clip may slip out of the slot

Stop once the end of the rod lines up with the back side of the slot

Castrator is fully loaded

Firmly grip the scrotum and squeeze it a couple of times to work some of the fatty tissue downward

Continue hold the scrotum. Slip the scrotum through the band. Placing the band just above the testicles.

DO NOT PLACE BAND NEXT TO THE BELLY – Just below it.

Release the band from the castrator Continue holding the scrotum – Pull (jerk) the castrator back with the other hand. Don’t let the scrotum move while performing this

Let the base of the castrator rest next to the scrotum and let the scrotum hang naturally. No need to pull back on the castrator

Place one hand on the side grip and one on the pull back rod. Pull back the rod as far as possible.

Take care not to hit the blade handle. Continue tightening with pistol grip handle

There is a small stop weld on the rod which will stop the rod from tightening any further.

Use the crimp handle to crimp the retaining clip. Crimp until the handle stops

Use the bland handle to cut the band. Follow through completely

Top view of blade cutting band

Now jerk back on the castrator and pull the raining clip from the slot

Castrator completely removed from scrotum

Inspect band to ensure no twists and not to close to belly

Inspect clip to ensure it is on correctly

#

Video: How To Operate a EZE Bloodless Castrator

Watch Matt demo how to operate the Eze Bloodless Castrator

World-Leading Integrated Livestock Handling Systems.

Whether its safety, quality, efficiency, innovation, or other benefits; Te Pari goes above and beyond to ensure that you can choose the solution you need.

Follow us:

Sign up for our newsletter!

Keep up to date with the latest news and deals from Te Pari.

Te Pari © 2025