Lenta Manual Crush Range

Lenta MX2 Vet Crush

Lenta Manual Crush Range

Lenta MX3 Vet Crush

Lenta Manual Crush Range

Lenta MR3 Vet Crush

Lenta Manual Crush Range

Lenta MR2 Vet Crush

Lenta Manual Crush Range

Lenta MR2 Vetless

Lenta Manual Crush Range

Lenta MS1 Vet

Lenta Manual Crush Range

Lenta MS1 Vetless

Lenta Manual Crush Range

The Lenta Crush range is built tough to work easy

The Lenta Crush is the livestock handling ‘all-rounder’ and provides a safe, efficient and secure working environment for both user and beast on a multitude of operations across the country. Made in New Zealand using high-quality steel and fully hot-dip galvanised after welding, this cattle crush is made to handle cattle big and small, and will withstand everything that is thrown at it. Available with a variety of gate options, allowing access to virtually any part of the animal, this crush is fantastic value for money.

Overview of the Lenta Crush

Overview of the Lenta Crush

Listen to Alistair Bird as he takes us over a few key features of the Lenta MX Crush. 

Watch Now

1 Piece Side Gates

The Entry Level Option

A basic one-piece side gate option with a slam latch on each side with rails only (no sheeting). Optional anti-backing ratchet and offside sort handle are available.

lenta ms1 vet

2 Piece Side Gates

Sheeted Lower Gate

Separate upper and lower gate. The upper gate has a anti-backing ratchet for animal restraint. The lower sheeted gate gives easy access for mothering on calves and hoof inspection. The gates on both sides open at the front and opened together for easy sorting.

lenta mx2 vet crush

3 Piece Side Gates

The 3 Piece Gate System

With all the features of the 2 Piece gate plus the innovative eRail Gate & a drop-down access gate at the back of the upper gate. This gate combination provides unrivalled access to the animal in the crush. The innovative eRail Gate when fitted with the electronic controls becomes an integrated EID reader.

lenta mx3 vet crush

Side Gate Options

A Solution to suit your needs

1 Piece Side Gates

2 Piece Side Gates

3 Piece Side Gates

Vet Access Option

Vet Access Option

Do you need a Vet Model Crush?

If you are running cows and may need to perform breeding operations in the crush, then the Vet Model is recommended. The Vet Model has a door on both sides and this serves as easy access through the crush. The vet door swings around behind the animal and can be opened and closed with a foot operated lever. If you are mainly use your crush for weighing, then the Vetless Model crush will be ideal. 

Floor Options

Floor Options

The Rubber Floor is standard on the Lenta MR and MX models. The Anti-skid Rubber Floor is extremely hard wearing, quiet to use and provides a more natural surface for cattle to stand on.

Lenta MS models have a steel floor.

Parallel Squeeze Option

Parallel Squeeze Option

Lenta MX Model Only

The Lenta Parallel Squeeze System moves the side gates together to reduce the animal compartment width from 750mm to 410mm. It is operated with an easy to use horizontal lever at the front of the crush. The Squeeze System is ideal for weighing young stock as it prevents them from turning around in the crush and is also great for calving or vetwork as it prevents unwanted animal movement.

Quiet Proven Headbail Locking System

The Te Pari C1000 headbail uses a simple quiet friction locking system that automatically locks in any position, to ensure your cattle work is easy and safe.  The Headbail Lock System comes with an unbeatable Lifetime Warranty.

walk through headbail on lenta crush

Anti-Rattle Slam Latches

The heavy duty, adjustable slam latches are quiet and easy to use. A plastic keep on the latch striker makes the gate super quiet to operate.

new slam latches2

Auto Latching Sliding Gate

This innovative gate design features a compact top rail that minimises any protrusion into the working area and also an auto-lock latch to prevent the cattle from muzzling the gate open.

Classic Crush Compact Sliding Gate higher res 2

Anti-Slip Backing Bar System

This innovative system prevents the backing bar from slipping out sideways and causing an injury to the operator. Traditionally when an animal is in the cattle crush any tail-end sideways movement could cause the backing bar to be pushed sideways out of the crush, sometimes at considerable speed potentially causing injury to the operator.

Anti Slip Backing Bar System

Front and rear heabail control

All Lenta Crushes have front and rear handles to open and close the headbail. The rear handle keeps operator out of the animal’s flight zone and the front handle is handy for when you're working at the front of the crush.

lenta rear headbail handle

Yoke Headbail

The pipe yoke headbail door design provides a secure hold for all cattle. The yoke design hold the cattle head securely reducing the need for a Head Scoop. If handling young calves an optional Straight Yoke Attachment is available.

te pari lenta crush yoke headbail

Why Choose a Lenta Crush?

Features to make cattle handling easy

Quiet Proven Headbail Locking System

Anti-Rattle Slam Latches

Auto Latching Sliding Gate

Anti-Slip Backing Bar System

Front and rear heabail control

Yoke Headbail


What Lenta Model Is best for me?

Use the table below to help decide which Lenta crush model is best for you.

Item

Lenta MS

Lenta MR

Lenta MX

Flooring Type Steel Tread Plate Anti-Slip Rubber Anti-Slip Rubber
Side Gate Options 1 or 2 piece gates 2 or 3 piece gates 2 or 3 piece gates
Parallel Squeeze No No Yes
Vet Access Vet or Vetless models available Vet or Vetless models available Vet or Vetless models available
Anti-Backing System Optional Included Included
Integrated EID Reader No Optional Optional

Offside Draft Handle

The offside drafting handle allows the operator on the working side of the crush to open and close the offside gate by way of an overhead handle located at the rear of the crush. This allows cattle to be drafted directly out of the crush without the operator having to leave the working area. This handle is optional on all models.

Classic Crush Offside Draft Handle

Sternum Bar

The Sternum Bar bolts onto the floor of your Te Pari Crush and prevents animals from going down while in the crush. The curved galvanised steel pipe design is strong, easy to fit and removable.

optional sternum bar

Straight Yoke Attachment

The Straight Yoke Attachment option is great for calves that may not be tall enough to be held comfortably in the usual headbail.

straight yolk attachment

Weigh Scale Display Pendant

Get the best view of your weigh scale with the new bolt-on Weigh Scale Display stand. Simply bolted to the rear of the cattle crush, this stand can be adjusted in height and rotated to get the best view for you.
It also keeps the load bar cables out of the way with internal routing through the frame, making for a clean and trip-free workplace.
Available on all Lenta Crushes.

weigh scale pendant

3-Way Drafting Module

Our manual 3-way drafting module is designed for easy and efficient drafting and to save labour. Wire ropes control the drafting gates from the rear of the crush.

3 way drafting module

 

QuikDose Backline Applicator

The new QuikDose Backliner mounts at the top of your cattle crush and attaches to the Te Pari Dosing Gun for easy, safe and quick application of any pour on treatments. The QuikDose Backliner can be attached to a Revolution Smart Gun allowing you to accurately treat your cattle based on their actual weight. The unique and patented dual chamber drip free tube runs on low pressure and can handle any treatment type.

quikdose backliner system

Options & Accessories

Offside Draft Handle

Sternum Bar

Straight Yoke Attachment

Weigh Scale Display Pendant

3-Way Drafting Module

QuikDose Backline Applicator


A cattle crush built to last

A cattle crush built to last

Scottish Farmer, Douglas Frame recently invested in a Te Pari Classic Cattle crush for his 220-hectare family farm based in South Lanarkshire. Find out about his experience in this video.

Watch now

ON-FARM DELIVERY*

ON-FARM DELIVERY*

Your Te Pari Cattle Crush can be delivered to your property on a Te Pari truck and unloaded with the on-board crane. This makes delivery and positioning in your yards easy, hassle free and safe.

*VIC, NSW, SA & TAS only. 

Galvanised & made in NZ - built to last!

Galvanised & made in NZ - built to last!

Te Pari livestock equipment is an investment you want to last, so all steel components are hot dip galvanised. During galvanising every item is cleaned in acid to remove all traces of scale or rust, then dipped in a hot galvanising zinc bath which coats it completely, even in places unreachable with spray or powder coating. Testing has proven that the galvanising process does not weaken the steel in any way. The galvanising actually becomes part of the steel surface for superior rust protection. Thats why we offer our class leading 10 Year Galvanising Warranty.

All Te Pari livestock equipment is manufactured in New Zealand under strict quality control standards using first grade Australian made steel. Our modern factory includes numerous robotic welders, CNC laser cutter's and other CNC equipment. 


Download the Lenta Crush Brochure

Want more information?

Download the Lenta Crush Brochure