The U-Bow system is uniquely manufactured to leave the upper area of the race completely free of any obstructions or overhead braces.

This system allows the user to narrow the width of the race by moving the panels in. Quick and easy to adjust and prevents calves from turning around in the race.

The Te Pari Cattle Yard uses catwalk braces that attach to the side rails of the panel and to the ground. Timber is then fastened to the braces, which are 1.0m wide, providing plenty of room for several people to work on the catwalk simultaneously. A handrail is optional and recommended in some designs where cattle are regularly held in the area next to the catwalk.

The Super C-Force Gate System is an optional heavy-duty 3.2m revolving steel gate which reduces the size of a circular force pen as the cattle enter the race. The gate locks quietly into the special gates of the circular pen every 0.5m, moving the cattle up to the race. The pen can hold approximately 15 head of cattle meaning the operator can process 2-3 race loads of cattle before having to refill from the main pens. Almost no need to climb into the forcing pen.

The nylon sleeved slam latches are super quiet and safer as animals are kept calm and stress free. The gate latches automatically from either side. The strike plate is extremely compact with rounded edge to prevent stock damage/bruising.

Outside panels are 1.80m high and inside panels 1.45m high. The lower inside panels allow the operator to bend over and work the stock with ease. For large animals the optional Drop Top Panel System can be fitted to the inside of the race. These panels are 1.8m high, and the top rail folds down to the normal working height of 1.45m. This provides protection if handling large cattle and the option of easy access for younger stock.

All yards are built with top quality NZ-made oval tubing called Cattlerail on all horizontal rails. This tube has the strength of a square tube however the large flat side makes it animal friendly - no single pressure points and no sharp edges. Deflection analysis has shown that Cattlerail is the strongest in its class.

All steel components are hot dip galvanised and rust proof. During galvanising each yard component is cleaned in acid to remove all traces of scale or rust, then dipped in galvanising zinc, coating it completely in places unreachable by spray or powder coating.

Te Pari has a wide range of proven plans designed for integration with crushes, scales and drafting systems. With 100's of yard in action for many years you can be assured that a Te Pari Yard actually works!