Lenta Cattle Crush
The Lenta manual cattle crush is the ultimate all-purpose livestock handling solution, providing a safe and efficient working environment for farmers and livestock worldwide. It is designed to accommodate both large and small cattle and is built to withstand harsh conditions.
10 Year
warranty
on the hot dip galvanising
Lifetime
Warranty
on the headbail locking system
Heavy Duty
Construction
No compromise on quality
On-Farm
Delivery
Hassle free delivery direct to your farm
The livestock handling all-rounder.
The Lenta Manual Crush is a versatile livestock handling solution that ensures a secure and efficient working environment for both animals and farmers.
Customised to fit your needs.
The Lenta Manual Cattle Crush Range is available with a variety of side gate options, allowing the crush to be customised to fit your operation's needs.
1
Three Piece Gate
The 3-piece gate system has two inspection gates in the upper gate plus all the features of the 2-piece gate system. The front inspection gates can be fitted with Te Pari's patented integrated eRail EID Antenna, while the rear gate folds down flat to provide unimpeded access to the animal.
2
Two Piece Gate
The 2-piece gate consists of separate upper and lower sections. Both gates swing outward and can operate independently or as a single unit. The sheeted lower gate can be opened for mothering on a calf or hoof inspection work, while the upper gate provides full access to the animal's body
Get the job done right.
Heavy-Duty C1000 Head-Bail
The Te Pari C1000 head-bail features wide-opening, sheeted doors that eliminate obstructions and tripping hazards. The doors open and close with the easy-to-use, 'push/pull' handle. While open, a floor-to-ceiling gap encourages the animal to move forward.
Extra Heavy Duty C3000 Headbail
The Te Pari C3000 Headbail has all the features of C1000 Headbail plus extra-Strong Headbail Doors designed for use with the CollarBoss Hydraulic Neck Extenders.
Parallel Squeeze System
The Lenta parallel squeeze system minimises unwanted movement by reducing the size of the animal compartment from 750mm to 340mm; this is useful for weighing young stock or managing larger animals during calving or breeding procedures.
Vet Access Doors
The Lenta cattle crush with vet access doors provides easy access to the animal's rear for breeding or veterinary procedures.
Neck Access Gate
Available on the Lenta MXi model crush, the front neck access gate allows the operator to get uninterrupted neck access for TB testing or injections. Two adjustable swing gates over-lock, protecting the operator if the animal was to try and move.
Packed with even more.
Compact Entry Gate
The entry gate uses a compact top rail that minimises protrusion into the working area, and the auto-locking latch prevents cattle from muzzling the gate open.
Integrated EID Gate
The patented eRail integrated EID reader is an accessory to the 3-piece gate system. With the EID antennas built into the gate frame, the operator can then see through to the headbail without visual obstruction, unlike traditional EID readers.
Offside Draft Handle
The offside sorting handle allows the operator on the working side of the crush to open and close the offside gate. The handle is adjustable for operator height and is an optional add-on for all models.
Anti-Slip Backing Bar
The anti-slip backing bar system helps the operator move a stubborn animal forward. Its unique track and disc system prevents the bar from sliding out and injuring the operator. This feature is built into the 2 and 3-piece gate systems but is also available as an add-on for the 1-piece gate system.
Load-Bar Mount
The pre-drilled load-bar mounting plates are compatible with Te Pari, Gallagher, and Tru-Test load bars.
Anti-Rattle Slam Latches
The anti-rattle slam latches have nylon bush inserts that reduce steel-on-steel noise. The glass-reinforced plastic handles ensure smooth, effortless operation.
Cattle Comfort.
Steel Floor
The steel floor is a simple, low-cost flooring option. It has a raised tread pattern to ensure a sure-footed surface.
Anti-Skid Rubber Floor
The hard-wearing, anti-skid rubber floor provides a quiet and natural operating surface for cattle.
Download the Lenta Pricelist!
Fill out the form to download the full pricelist for the Lenta Cattle Crush Range
Built to outlast.
Made In New Zealand
All our products are made in New Zealand. We’ve invested heavily in robotic & CNC equipment, ensuring there’s no compromise on quality and keeping prices competitive with imported equipment.
Fully Hot-Dip Galvanised
All of Te Pari’s livestock equipment is 'hot dip' galvanised for the ultimate protection against corrosion. This galvanising process ensures complete coverage of all components, inside and out.
Heavy-Duty Construction
The Te Pari Lenta Cattle Crush uses high-quality steel with oval tubing to enhance the crush's strength and remove sharp edges that may cause injury.
Explore The Range.
Lenta MX
Parallel Squeeze
Lenta MR
Rubber Floor
Lenta MS
Steel Floor
Request a Quote